Designed to provide isolation of fueling dispensers that share common products.
Overall module dimensions: 2.0"W x 2.0"H x .75"D .
Mode of operation: Solid State Relay, if all initiate switches are open,
the solid state relay output remains open. If, at any time, one or
more of the four (4) switches close, the relay output closes.
Operating voltage: 120VAC, .75 Ampere steady state, 10 Ampere
inrush for 16 milliseconds, off state leakage current 5 milliamperes
A solid state switch exhibiting up to 10 milliamperes of leakage will not
cause unit to activate its output.
The inputs may be connected to L1 or L2 in any combination as long as the white
common wire is connected to ACC.
If more than four (4) inputs are required, two (2) or more units may be
connected with the outputs in parallel. Their black wires must be
all connected to L1 or all connected to L2.
Seven 6" pre-stripped 18AWG wires for easy installation.
Prices subject to change without notice. Certain restrictions apply. Equipment determined unrepairable will be returned at the cost of the sender. We reserve the right to determine whether any item is beyond economic repair or refurbishing. Manufacturer's names and numbers are for reference and identification purposes only. ESCO repairs, refurbishes and resells equipment made by original equipment manufacturers, but is not affiliated, authorized or certified by these companies.
Copyright 2001 ESCO Services, Inc. All Rights Reserved. Unauthorized Duplication Prohibited